Eurocopter EC 135 and 145 450 class (Heliartist), Approximate scale 1 : 15
We require approximately 3 days to process your order before dispatched. Any questions,
just ask and we will be happy to answer. For easy reference, please note that the picture we
show is in finish form (RTF). the mechanic is for some scale parts are based on Trex SE version
Add on scale parts means just glue it on the fuselage directly. no need to make any opening
just ask and we will be happy to answer. For easy reference, please note that the picture we
show is in finish form (RTF). the mechanic is for some scale parts are based on Trex SE version
Add on scale parts means just glue it on the fuselage directly. no need to make any opening
Exterior Scale Parts
450 EC135/145 Antenna base centre top - available
without metal rod antenna. click view detail for further detail and purchase
450 EC135 Antenna tail boom left side - available
without metal rod antenna. click view detail for further detail and purchase
450 EC135 Antenna on stabilizers - available
without metal rod. click view detail for further detail and purchase
450 EC135 Pitot tube x2 - available
without metal rod. click view detail for further detail and purchase
450 EC135 Stabilizer antenna - available
without metal rod. click view detail for further detail and purchase
450 Tail VOR Antenna EC 135/145, 1 set R and L - available
Made from UV Resin with unbeatable smooth surface finish
and detail for this small scale parts. best use CA glue
for assembly or installation. No sanding or priming base
coat required before painting.
For cheperr option you can choose ABS plastic
and detail for this small scale parts. best use CA glue
for assembly or installation. No sanding or priming base
coat required before painting.
For cheperr option you can choose ABS plastic
450 EC135 Sensor antenna Fenestron - available
click view detail for further detail and purchase
450 EC135/EC145 Under carriage Support Bracket, 4 pcs - Available
Please go to view detail for purchase
GPS Antenna 450 class - available
Available
Antenna Flat Type 450 class - available
Available
450 Fenestron Antenna EC 135 T1 (twin) - 2 pieces - available
This is for Eurocopter EC 135. click view detail for further detail and purchase
450 Fenestron Antenna EC 135 T2- 1 set - available
This is for Eurocopter EC 135. Made from Resin and metal rod. click view detail for further detail and purchase
Bottom Tail Antenna 450 class - available
Available
Top side Antenna 450 class - available
Available
450 Top Side radio Antenna T2 - available
This is for EC 135 and EC 145, click view detail for further detail and purchase
Type Antenna 450 class - available
Radio/Curved Antenna 450class - available
Available
450 Antenna under boom/ Twin bottom flat square tail boom antenna - available
Twin tail boom antenna located at the bottom of tail boom. picture is in almost. finish product. click view detail for further detail and purchase
450 EC 135/145 Pitot tube under cab, in Kit form 1 set - Available
click view detail for further detail and purchase
450 Pitot Tube, in pair - available
Made from UV Resin for superfine surface finish and details
450 GPS Antena Cover - available
click view detail for further detail and purchase
450 EC135/145 VHF/UHF antenna - available
please got o 'view detail' tab fir further options and purchase
450 EC135 Cover below Fenestron - available
Click view details for more options and choice
450 EC 135 Cover for Rectifier Holder - available
Made from ABS Plastic for Durability and strength
450 EC 135 Stator and Rectifier for Fenestron T 1 , 1 set - available
Made from ABS Plastic for durability and strength and for
easy of installation.
450 EC135 Access lighting x2- available
Click view details for more options and choice
450 EC135 Tail Nav Light - Available
Please go to view detail for purchase and further options
450 EC135/145 Landing Skid Lamp with double clamps, 2 sets (Left and Right) - Available
Made from ABS Plastic
450 Scale Landing housing light EC 135 - 1 set - available
Made from ABS Plastic consists of 2 main parts, holder and the lamp housing.
This lamp house rotates up and down.
This lamp house rotates up and down.
450 EC 135/145 Navigation Light for Horizontal Stabilizer, 2 sets in kit form - available
please go to 'view detail' for further detail and purchase.
450 Position Light R/L - available
Made from UV Resin.
Picture is for reference only
450 Slide Window front R/L Static - available
Made from ABS Plastic.
Picture is for reference only
450 Rear Door Window Slider R/L (2 each) T1 (small) - available
made fromABS Plastic.
450 Rear Window Slider T2 large (R/L) - available
Made from ABS Plastic.
450 Exhaust cover - available
Made from ABS Plastic. Picture is for reference only
450 Set of Air inlet side type 6pcs (add on) - available
Made from ABS Plastic.
Picture is for reference only
450 Air Outlet Top Rear (add on) - available
Please go to view detail for purchase and further options
450 EC135 DOuble rear Side Grill - Available
Please go to view detail for purchase and further options
450 cowling latches 8x (Add on) - Available
Please go to view detail for purchase
450 Stabilizer center brackets in pair or R&L, available
made from plastic material
450 stabilizer end/tip bracket in pair R&L, available
made from plastic material
450 EC 135/145 Superfine Scale Cowling latches, 16 pcs - available
900 EC 135/145 Superfine Scale Cowling latches consist of 16 pcs in 1 pack. This ultimate quality made from UV resin 3D Printer
450 EC135/145 Door hardware/Rear Door Emergency Door guide Latch, x2 (1R & 1L - Available
for purchase please go to view detail tab
450 EC135 Scale Tail Latches - available
Tail latches in scale. 1 pack consist of 16 each of this item. It is ready to
install and no sanding required, Made from UV Resin for superfine
surface finish and detail
install and no sanding required, Made from UV Resin for superfine
surface finish and detail
450 Static Hinges - available
hinges for cowling in pair made from UV Resin
450 Engine Cowl long hinges - available
Made from ABS Plastic.
Picture is for reference only
450 Rear Door Static Hinges - available
Made from ABS Plastic.
Picture is for reference only
450 EC135/EC145 Static Hinges set R&L - Available & price to be published
Please go to view detail for purchase and further options
450 EC135/145 Rear door lock - available
for purchase please got to view detail tab
450 EC 135/145 Static Door Handle, 4 pcs - available
Made from UV Resin with unbeatable smooth surface finish
and detail for this small scale parts. best use CA glue
for assembly or installation. No sanding or priming base
coat required before painting.
and detail for this small scale parts. best use CA glue
for assembly or installation. No sanding or priming base
coat required before painting.
450 EC 135/145 Straight Triangular foot step 450 class in pair T1 - available
Made from ABS Plastic for extra Strength and durability
450 EC 135/145 Different level Triangular foot step, in pair - available
Made from ABS Plastic for extra strength and durability
450 Foot rest Tubular - 2 sets in kit form - available
This tubular foot rest is also used as holder for FLIR or spectrolab lamp
450 Scale End cap for Tubular step - 1 each - available
Scale end cap for tubular foot step, can be used for scale connector to
Spectrolab of FLIR
Spectrolab of FLIR
Rounded foot rest 450 class - Available
.
500 EC 134/145 Sliding Door Slider Cover, R and L - available
Made from UV Resin with unbeatable smooth surface finish
and detail for this small scale parts. best use CA glue
for assembly or installation. No sanding or priming base
coat required before painting.
and detail for this small scale parts. best use CA glue
for assembly or installation. No sanding or priming base
coat required before painting.
450 EC 135/145 Windscreen Wiper, 1 set available
Made from UV Resin with unbeatable smooth surface finish
and detail for this small scale parts. best use CA glue
for assembly or installation. No sanding or priming base
coat required before painting.
For cheaper option you can choose ABS plastic
450 EC 135/145 Wiper Cable deflector - available
This small part can only be made with fine surface finish and details
by using UV material. We will not be able to produce using ABS plastic
as this will be lack of details and rough surface finish
Cable Cutter Top Side 450 class - available
Made from UV Resin with unbeatable smooth surface finish
and detail for this small scale parts. best use CA glue
for assembly or installation. No sanding or priming base
coat required before painting.
For cheaper option you can choose ABS plastic
and detail for this small scale parts. best use CA glue
for assembly or installation. No sanding or priming base
coat required before painting.
For cheaper option you can choose ABS plastic
Cable Cutter Bottom Side 450 class - available
Made from UV Resin with unbeatable smooth surface finish
and detail for this small scale parts. best use CA glue
for assembly or installation. No sanding or priming base
coat required before painting.
For cheaper option you can choose ABS plastic
and detail for this small scale parts. best use CA glue
for assembly or installation. No sanding or priming base
coat required before painting.
For cheaper option you can choose ABS plastic
450 EC 135/145 Skid Cable Deflector, in Pair R/L - available
For a matter of durability, this scale part only made from ABS plastic
450 EC135/EC145 Dummy Side body Steps - Available
consist of 6 pcs. click view detail for further detail and purchase
450 Fenestron Holder T1, 2 ea - available
for further detail and purchase please click 'view detail'
450 Fenestron Holder T2 available
For further detail and purchase, please click tab 'view detail'
450 EC135/145 Air Intake/Air Inlet Top cabin - available
For further detail and purchase, please click tab 'view detail'
450 EC135/145 Air Intake/Air inlet Under Cabin - available
For further detail and purchase, please click tab 'view detail'
450 EC145 Air inlet 1 Set (pack of 6) Top Cowling- available
3 pairs for left and right side. Design to follow surface contour of the fuselage. 3 pcs for each cowling fuselage (right and left side).
450 Set of Air Inlet 5 pcs
Made from ABS Plastic.
Picture is for reference only
450 EC135/EC145 Naca air inlet - Available
Consist of 2 large and 1 small. Click 'view detail' for further details and purchase
450 Bear Paw T1, in pair - available
.Made from ABS Resin for the best surface finish result and
durability over impact on hard landing
450 EC 135/145 Bear Paw T2, 1 set R&L - available
Made from ABS Plastic for durability and impact caused by
hard landing
450 Scale Landing Skid - out of stock
Made from Metal hollow tube for the skid and plastic for the bear paw.
450 EC135/EC145 Water Raft / Float set in kit form - Available
For further detail and purchase pase go to 'View Detail' Tab. pictures shown are in RTF / Finish form . Thi set contains Left and Right side. Please advise your inner and outer diameter of your own main landing skid.foot step are not part of this kit.
450 EC 135/145 Scale handles, 6 pcs - available
Made from UV Resin with unbeatable smooth surface finish
and detail for this small scale parts. best use CA glue
for assembly or installation. No sanding or priming base
coat required before painting.
For cheaper option you can choose ABS plastic
450 EC135 Outlet x2 - available
Click view details for more options and choice
450 EC135/145 long outlets, x2 - Available
click view detail for further detail and purchase
450 EC135/EC145 short outlet, 2x - available
click view detail for further detail and purchase
450 EC135 Pressure compensation pipe - available
Click view details for more options and choice
450 EC135 Front support Triangular step bar for landing gear x2 - available
click view detail for further detail and purchase
450 EC135 Rear support for Triangular Step bar landing gear x2 - available
click view detail for further detail and purchase
450 EC 135/145 Back Mirror - in Kit form - available
Made from ABS Plastic, The main mirror is the real one made from Acrylic. However the smaller one due to the size of the part, can not
use the real one. All support made from ABS plastic
use the real one. All support made from ABS plastic
Police / Search and Rescue Equipment
450 Under Belly Hook - Available
Made from Combination of ABS and plastic sheet in kit form
450 EC 135/145 Radar Nose T1 - available
Made from Casted Resin with hollow inside for easy setting
and installation. See 'How it's made for easy reference
and installation. See 'How it's made for easy reference
450 EC 135 Radar Dome T2 - Available
Made from ABS Plastic in kit form
450 EC 135/145 Cylinder Tank in Kit form - Available
Made from Plastic in kit form, It is very light. Picture shows in
finish product
finish product
450 Oxygen Tank 450 class - Available
.
450 EC135/145 Winch connections/Electrical Connector - 1 set (2 pieces) - available
consistof 10 sets
450 Spectrolab Front holder Set - available
Made entirely from ABS Plastic. Spectrolab
is not included. PIcture is from 1/6 scale
is not included. PIcture is from 1/6 scale
Spectrolab in kit form 450 class - available
Supplied in parts form, consist of high quality pre cast material, aluminium tube, metal strip /ABS parts and micro screws. You also require to have foot rest tubular for mounting to Helicopter. Assembly manual is provided
Spectrolab in assembled form 450 class - next 2-3 days
Painted and Ready to install
FLIR CAMERA in kit form 450 class - available
Supplied in parts form, consist of high quality pre cast material, aluminium tube, metal strip and microscrews. You also require to have foot rest tubular for mounting to Helicopter. Asembly manual is provided
FLIR Camera in assembled form 450 class - next 2-3 days
Painted and ready to install
450 EC 135 Winch in Kit Form, 1 set - available
Supplied in parts form, consist of high quality pre cast Resin material for winch housing
to obtain a best surface finish and ready to paint, metal hook, aluminium tube, carbon rod
or metal tube and other material required.
Winch in assembled form 450 class - available
please go to view detail tab for options and purchase
450 EC 135/145 Double Speaker, 1 set - available
Made from UV Resin with unbeatable smooth surface finish and detail for this small scale parts. best use CA glue for assembly or installation. No sanding or priming base coat required before painting.
For cheaper option you can choose ABS plastic
For cheaper option you can choose ABS plastic
Interior Scale Parts
450 EC135/145 Distress Beacon/Emergency Beacon 1 set - available
consist of in 1 pcs. This is for EC 135 and EC 145.
450 EC 135/145 Pairs of seat - in kit form - available
Made from casted resin for smooth surface finish. 2 sets
Designed to take advantage of vacuum casting process
to obtain thin wall and super light weight
450 EC 135/145 Main Cockpit Console panel, in kit form - available
Designed for EC 135 450 class, Ready to Install. Combination
of ABS Plastic for cockpit dome. Decal instrument panel is
also provided
of ABS Plastic for cockpit dome. Decal instrument panel is
also provided
450 EC 135/145 Scale Cockpit in kit or parts, 1 set - available
Designed for EC 135 450 class, in full kit form .This set include 2 sets of
collective and cyclic sticks and seats
collective and cyclic sticks and seats
Scale Cockpit set in RTF (finish) 450 class - Available
Designed for EC 135 450 class, Ready to Install. Combination
of ABS Plastic and UV Resin , This set include 2 sets of
seats, collective and cyclic sticks and base made from Plastic material.
Grey plastic base is not included.
of ABS Plastic and UV Resin , This set include 2 sets of
seats, collective and cyclic sticks and base made from Plastic material.
Grey plastic base is not included.
450 cockpit pedal, stick and cyclic 1 set each - available
for purchase and further options pleae go to 'view detail'
450 Rotor Brake stick - Available
Click 'view detail' for further deails and purchase
450 Overhead panel base - Available
for further detail and purchase, please visiti 'view detail' tab.