This page is for Scale Parts EC 135 25% scale or 1/4. Unless stated in RTF/
Finish form, All parts are in kits and made from ABS Plastic and/or in
combination with UV Resin. Pictures shown are based on 3d Design drawings.
For details, please refer to 'how it's made' Section.
FOR SOME ITEMS WITHOUT PRICE(ZERO PRICE) - WE ARE WAITING FOR THE PRICE TO BE PUBLISHED
Exterior Parts
1/4 EC135/145 Antenna base centre top - available
Click view details for more options and choice
1/4 EC135/145 Antenna tail boom left side -- available
Click view details for more options and choice
1/4 EC135/145 Antenna on stabilizers - available
Click view details for more options and choice
1/4 EC135/145 Pitot tube x2 - available
Click view details for more options and choice
1/4 EC135/145 Stabilizer antenna - available
Click view details for more options and choice
1/4 EC135/145 Lateral tail antenna x2 - available
Click view details for more options and choice
1/4 EC135 Sensor antenna Fenestron - available
click view detail for further detail and purchase
1/4 EC135/145 Antenna in front of intake x2 - available
Click view details for more options and choice
1/4 EC 135 GPS Tail Boom Box, in kit form - Available
For further details, options and purchase, please go to 'view detail'
1/4 Antenna Flat Type -1 set - available
This is for Eurocopter located under the belly. consist of 1 long and 2 short. click view detail for further detail and purchase
1/4 EC 135 Fenestron Antenna 1 piece only - Available
For further details, options and purchase, please go to 'view detail'
1/4 Fenestron Antenna EC 135 T2- 1 set - available
This is for Eurocopter EC 135. Made from Resin and metal rod. click view detail for further detail and purchase
1/4 EC135/145 Rear antenna/Tail Antenna -x2 - Available
For further details, options and purchase, please go to 'view detail'
1/4 EC 135/145 Top Antenna/Top Side radio Antenna T1, 1 set - Available
For further details, options and purchase, please go to 'view detail'
1/4 EC 135 Distress Beacon Antenna, 1 set - Available
For further details, options and purchase, please go to 'view detail'
1/4 Type Antenna, 1 pcs - Available
Without metal rod. Made from UV Resin
1/4 EC 135/145 Curved antenna/Radio Antenna, 1 pcs - Available Now
For further details, options and purchase, please go to 'view detail'
1/4 EC135/145 Antenna below tail boom - available
Click view details for more options and choice
1/4 EC 135 Pitot Tube Under Cabin - Available
For further details, options and purchase, please go to 'view detail'
1/4 Pitot Tubes in Kit form Type 2 - pack of 2 (1R & 1L) - available
For EC 135/145. click view detail for further detail and purchase
1/4 GPS Antenna Cover - available
click view detail for further detail and purchase
1/4 EC135/145 Cover below Fenestron - available
Click view details for more options and choice
1/4 EC135/145 Access lighting x2 - available
Click view details for more options and choice
1/4 Spotlights/Landing Skid Lamp T1 , x2 (1R & 1L) - Available
For further details, options and purchase, please go to 'view detail'
1/4 EC135 Landing Skid Lamp with double clamps, 2 sets (Left and Right) - Available
Can be nade Made from ABS Plastic, comes with lens, LED and LED holder.
1/4 Folding landing Light, in kit form - Available
Made from Resin, ABS Plastic. Fasteners are included. See this video
for further details. https://www.youtube.com/watch?v=wmNVumdQTOE.
for further details. https://www.youtube.com/watch?v=wmNVumdQTOE.
You need to add your own servo
1/4 EC 135 Folding Landing Light, in kit form - Available
For further details, options and purchase, please go to 'view detail'
1/4 Scale Landing housing light EC 135 - 1 set - Available
Made from ABS Plastic consists of 2 main parts, holder and the lamp housing.
This lamp house rotates up and down.
This lamp house rotates up and down.
1/4 EC 135 Nose Landing Light Housing , in kit form - Available
For further details, options and purchase, please go to 'view detail'
1/4 EC 135 Navigation Light for Horizontal Stabilizer, 2 sets in kit form - available
Made from ABS Plastic and designed for 5mm diameter LED Lamp. LED not inluded.
Other optio for themateria is UV Resin
1/4 Position Light EC145/Position Light T1 , x2 - 1R & 1L - Available
For further details, options and purchase, please go to 'view detail'
1/4 EC 135 Position Light T2, x2 - 1R & 1L - Available
For further details, options and purchase, please go to 'view detail'
1/4 EC 135 Position Light, x2 - 1R & 1L - Available
For further details, options and purchase, please go to 'view detail'
1/4 Tail Nav light for EC 135 - available
Made from ABS Plastic. The unique design will allow an operational LED mounted at the tip and hidden the wiring
onto fuselage. LED is not included
1/4 Top Tail scale Part for EC 135 - available
Made from Resin and ABS Plastic. LED can be mounted easily
using the ring provided. LED in the picture is not included.
click here for more details.
using the ring provided. LED in the picture is not included.
click here for more details.
1/4 Working Door Hinges in kit form 4 sets - available
it is in RTF and ready to install. for further detail and purchase please visit view detail tab
1/4 EC 135 Opening window/Working Front window opening slider, x2 (1R & 1L) - Available
For further details, options and purchase, please go to 'view detail'
1/4 Rear Door Window Slider R/L (2 each) T1 (small) - available
made fromABS Plastic.This is a functional part that make you
able to slide part of the rear window to open partially
able to slide part of the rear window to open partially
1/4 EC135 Rear Window Slider T2 (R/L) - available
Made from ABS Plastic. This is a working accessories. Part of the window now can be slide open and close like the original.
For further details, options and purchase, please visit 'view details'
1/4 Exhaust Cover EC 135- 2ea - available
1/4 Rear Exhaust Grill EC 135 - 2ea - available
Made from ABS Plastic
1/4 EC 135 Side Gril set, pack of 6 (2x3 parts) - Available
For further details, options and purchase, please go to 'view detail'
1/4 Air outlet Top rear side EC 135 - 2 ea - Available
1/4 EC 135 Top Rear Double grill Exhaust, 1 set 0f 2 pcs - Available
For further details, options and purchase, please go to 'view detail'
1/4 Engine exhaust T2 - 2 ea - available
Working Engine exhaust for airflow from inside Fuselage made from
ABS Plastic in super light weight material and design.
ABS Plastic in super light weight material and design.
1/4 EC 135 Scale Exhaust system - available & price to be published
Please go to view detail tab for more options and purchase, Inner holder will be
in thin design instead of big one
in thin design instead of big one
1/4 Door hardware/ set of Cowling Latches, x8 - Available
For further details, options and purchase, please go to 'view detail'
1/4 Stabilizer center brackets in pair or R&L T2, available
made from plastic material
1/4 EC135 center stabilizer bracket in pair T1- available
please go to 'view detail' tab for options and purchase
1/4 stabilizer end/tip bracket in pair R&L, available
made from plastic material
1/4 EC 135 Superfine Scale Cowling latches, 16 pcs - available
900 EC 135 Superfine Scale Cowling latches consist of 16 pcs in 1 pack. This ultimate quality made from UV resin 3D Printer
1/4 Hinges/Latches with butterfly screw , 16 pcs - Available
For further details, options and purchase, please go to 'view detail'
1/4 EC 135 Door hardware/Rear Door Emergency Door guide Latch, x2 (1R & 1L - Available
For further details, options and purchase, please go to 'view detail'
1/4 EC135 Scale Tail Latches - available
Tail latches in scale. 1 pack consist of 16 each of this item. It is ready to
install and no sanding required, Made from UV Resin for superfine
surface finish and detail
install and no sanding required, Made from UV Resin for superfine
surface finish and detail
1/4 Hinges - Non Working 4 ea - available
Dummy HInges for back side door of Eurocopter.
1/4 Static Hinges - available
hinges for cowling in pair made from UV Resin
1/4 EC 135 Engine Cowling Long Hinges, R&L - available
There are choice of material, made from ABS plastic and UV Resin. UV Resin
has superb detailed and superfine surface finish
1/4 EC135 Rear door hinges x4 - available
Click view details for more options and choice
1/4 EC135/145 Rear door lock - available
Click view details for more options and choice
1/4 EC135/145 Trapdoor handle x6 - available
Click view details for more options and choice
1/4 EC135/145 ventilation window for sliding door Left - available
Click view details for more options and choice
1/4 EC135/145 ventilation window for sliding door Right - available
Click view details for more options and choice
1/4 EC 135 Static Door Handle Rear, R/L - Available
For further details, options and purchase, please go to 'view detail'
1/4 EC 135 Working Door Handle, R/L - 1 set - Available
For further details, options and purchase, please go to 'view detail'
1/4 Triangular foot step flat T1 in kit form, 1 set - available
Triangular step bar including scale bracket made from plastic ABS for rear and front. Scale screws are not included.
1/4 Triangular foot step flat T1 in kit form, 2 sets - R&L - available
Triangular step bars in 3 pcs including scale bracket made from plastic ABS for rear and front. Scale screws are not included.
1/4 Triangular foot step different level T2, in kit form, 1 set - available
Triangular step bar including scale bracket made from plastic for rear and front. Scale screws are not included.
1/4 Triangular foot step different level T2, in kit form, 2 sets - R&L - available
Triangular step bars in 3 pcs including scale bracket made from plastic for rear and front. Scale screws are not included.
1/4 scale - 900 Foot rest Tubular - 1 set in kit form - available
This tubular foot rest is also used as holder for FLIR or spectrolab lamp
1/4 scale - 900 Foot rest Tubular - 2 sets in kit form - available
This tubular foot rest is also used as holder for FLIR or spectrolab lamp
1/4 EC 135 Rounded Step Bar set for R or L only - Available
Made from ABS Plastic and Aluminium tubing with OD 15mm,
Other size of Tubing, please ask. For further details, options and purchase, please go to 'view detail'
Other size of Tubing, please ask. For further details, options and purchase, please go to 'view detail'
1/4 EC 135 Scale End Cap Tubular, 1 pcs - Available
Please mention diameter of Inner Tube (ID dia) you have. Tube in the picture is not included. For further details, options and purchase, please go to 'view detail'
1/4 Foot Rest Tubular Holder - 4 pair (L/R) - available
Now can be purchased The holder only. This is to save delivery costs
for far/overseas customer without the aluminium tubes
for far/overseas customer without the aluminium tubes
1/4 Scale Round Bar Holder Premium - 2 sets R/L - available
Same as above but made form Solid ABS Plastic, no work required, just install.
The part include Scale fixing screws. This part is not only ready to install but also
very tough. Picture shows only 1 set.
The part include Scale fixing screws. This part is not only ready to install but also
very tough. Picture shows only 1 set.
1/4 Scale Sliding door set left & right side - 1 Set EC 135 V2 with bearing - available
This scale part is for working rear sliding door working as the real one.
Starting from 20/09/2012, this part will include Sliding door kit below.
click this link for video http://www.youtube.com/watch?v=uG3dN98aB8w
Starting from 20/09/2012, this part will include Sliding door kit below.
click this link for video http://www.youtube.com/watch?v=uG3dN98aB8w
1/4 Sliding Door rail cover (static) - available
For Eurocopter EC 135, This part is for Static Sliding door, Therefore
The kit contains only 2 rail cover parts and screws. Made from ABS
Plastic
The kit contains only 2 rail cover parts and screws. Made from ABS
Plastic
1/4 EC135 Wipers/Wind screen wiper set - 1 set (2 pieces)- available
Windscreen set for Eurocopter for EC 135
1/4 EC 135 Windshield Cable Deflector, 1 pcs - Available
For further details, options and purchase, please go to 'view detail'
1/4 Cable Cutter For Top Side - available
Consist of 7 parts in Kit forms. made from ABS plastic , resin and Metal hollow tube
1/4 Cable Cutter Bottom Side - available
Consist of 7 parts in Kit forms. made from ABS plastic,resin and Metal hollow tube
1/4 Step Ladder in kit form- 6 ea - available
This is for Eurocopter EC 135, side body steps opening.
Made from ABS and UV Resin, consist of 6 sets, 2 large and
4 small opening and steps
1/4 EC135 Dummy Side body Steps - Available
consist of 6 pcs. click view detail for further detail and purchase
1/4 EC 135 Fenestron handle/holder, T1, in pair - Available
For further details, options and purchase, please go to 'view detail'
1/4 Fenestron Holder T2 available
For further detail and purchase, please click tab 'view detail'
1/4 EC 135 Air inlet top Cab, 1 pcs - Available
For further details, options and purchase, please go to 'view detail'
1/4 EC 135/145 Air intake/Air inlet Under Cab, 1 pcs - Available Now
For further details, options and purchase, please go to 'view detail'
1/4 EC135 Air inlet 1 Set (pack of 6) - available
3 pairs for left and right side. Design to follow surface contour of the fuselage. 3 pcs for each cowling fuselage (right and left side).
1/4 Set of Air inlet in kit form - 5 ea - available
This is working air inlet for Eurocopter EC 135. Consist of 4 standard air inlet and 1 small one
1/4 EC135 Naca air inlet - Available
Consist of 2 large and 1 small. Click 'view detail' for further details and purchase
1/4 Skid Sink Protection T1 - available
Simply known as bear paws. Made from plastic material in pair. This is the same
part used for EC 145.
part used for EC 145.
1/4 Skid Sink Protection in Complete Part T1 - available
This package contain skid boom extension, boom end cover, skid boom extension
connector, skid protection made from resin and micro screws. Picture is in finish
product and only for reference.
connector, skid protection made from resin and micro screws. Picture is in finish
product and only for reference.
1/4 Skid Sink Protection in Complete Part T2- available
Made from ABS Plastic for R/L side. bolt and nut are included. click view detail for further detail and purchase
1/4 Skid Extension Plates EC 135 in Kit Form in Pair R/L - available
Skid extension Plate for EC 135 and EC 145. Kit contains ABS Plastic Parts only.
1/4 Scale handles 3 pairs R/L EC 135 - available
click view detail for further detail and purchase
1/4 EC 135 Body handles, 3 each - Available
For further details, options and purchase, please go to 'view detail'
1/4 EC135/145 Outlet x2 - available
Click view details for more options and choice
1/4 EC 135 Long outlets, x2 - Available
click view detail for further detail and purchase
1/4 EC135 Short outlet, 2x - available
click view detail for further detail and purchase
1/4 EC135 Pressure compensation pipe - available
Click view details for more options and choice
1/4 EC135/145 Front support for landing gear, 2x - available
Click view details for more options and choice
1/4 EC135/145 Rear support for landing gear, 2x - available
Click view details for more options and choice
1/4 Scale back Mirror in Kit form EC 135 - Available
click view detail for further detail and purchase. Rear Mirror is included
1/4 EC135/145 Antenna under tail - available
Click view details for more options and choice
1/4 EC135/145 VHF/UHF Antenna - Available
For further details, options and purchase, please go to 'view detail'
1/4 EC 135 Latches standard, 20 pcs - Available
For further details, options and purchase, please go to 'view detail'
1/4 EC 135/145 Winch connections/External body Electrical Connectors, one pair (2 pieces) - Available
For further details, options and purchase, please go to 'view detail'
1/4 EC 135/145 Winch connections/External body Electrical Connectors, 5 pairs (10 pieces) - Available
For further details, options and purchase, please go to 'view detail'
1/4 EC 135 Rear Bottom Antenna, 1 set - Available
For further details, options and purchase, please go to 'view detail'
1/4 EC 135/145 Antenna round/ADF Antenna, 1 pcs - Available
For further details, options and purchase, please go to 'view detail'
1/4 EC 135 Accessories 1, 8 each - available
For further details, options and purchase, please go to 'view detail'
1/4 EC 135 Single DME Antenna, 1 pcs - Available
For further details, options and purchase, please go to 'view detail'
1/4 EC 135 VHF Air 1 Antenna, 1 set of 2 pcs - Available
For further details, options and purchase, please go to 'view detail'
1/4 EC 135 VHF Air 2 Antenna, 1 set - Available
For further details, options and purchase, please go to 'view detail'
1/4 EC 135 VOR Antenna T2 Round Base, 1 pair - Available
For further details, options and purchase, please go to 'view detail'
1/4 EC 135 VOR Antenna T1 Square Base, 1 pair - Available
For further details, options and purchase, please go to 'view detail'
1/4 EC 135 Winch Electrical Connectors, 1 set - Available
For further details, options and purchase, please go to 'view detail'
Interior Parts
1/4 EC135 Distress Beacon/Emergency Beacon 1 set - available
Made from Resin, ABS Plastic or UV Resin in 1 pcs.
This is for EC 135 and EC 145. Picture shows 2 sets
for clarity purpose. Sticker is not included.
1/4 EC135 Working seat belt Seat Belt 4 points R&L in kit form, 2 sets - available
Supplied with the belt. The buckle is not static, can be opened and locked by turning the centre key. 'view details for further choice and details. 'see this video for detail https://www.youtube.com/watch?v=aPbFRVqjB9s.
1/4 EC135 Static Seat Belt 4 points R&L in kit form, 2 sets - available
Same as above but the head is static. supplied with the belt.
For further details, options and purchase, please visit 'view details'
For further details, options and purchase, please visit 'view details'
1/4 Fire extinguisher - 1 set - available
Scale fire extinguisher, made from ABS Plastic or UV Resin
1/4 EC 135 Telephone On Board, - Available
For further detail and purchase, please go to view detail
1/4 EC 135 Full Scale Seat in Kit form 1 set - 3 days production required
Made from ABS Plastic and designed to follow actual seat for EC 135/145.
The angle of the seat can be set, while the headrest not only the angle but
also the height. You can add your own fabric to cover the mechanic inside the
for further scale.
1/4 Light weight Seat 1 set in kit form, T2 - available
Made from plastic material with the weight lightest ever
we ever made
we ever made
1/4 EC 135/145 Cyclic Stick, 1 set R or L only - Available
For further details, options and purchase, please visit 'view details'
1/4 EC135 Collective Pitch lever in Assy Form EC135/EC145- - available
click 'view detail' for further details and purchase
1/4 EC135 Pedals/ Cockpit Pedal in kit form - x2 - available
Control Pedal For Pilot. This is for EC 135 and EC 145
1/4 EC135 Pedals/ Cockpit Pedal in kit form - 1 Set - available
click 'view detail' for further detail and purchase
1/4 Door Stabilus R/L - in Kit Form - available
Some light works and assembly is required. Made from Carbon Fiber,
Metal and resin material. Picture is in Ready to install form.
Metal and resin material. Picture is in Ready to install form.
1/4 Door Stabilus R/L - in Assembly Form - available
Ready to Install door stabilus for EC 135 and EC 145
1/4 Cockpit Panel T2 (half cockpit) cockpit half- Available
You can choose option between Kit form and RTF.
in drop down menu list in view detail
in drop down menu list in view detail
1/4 EC 135 Cockpit Set - Available
Combination of UV Resin and ABS Plastic to obtain the best
light weight and excellent surface finish. Panel instrument decals
and plastic glass panel are provided. For further details, options and purchase, please go to 'view detail'
light weight and excellent surface finish. Panel instrument decals
and plastic glass panel are provided. For further details, options and purchase, please go to 'view detail'
1/4 EC 135 Overhead Cockpit Panel - Availabel
For further details, options and purchase, please visit 'view details'
1/4 Rotor Brake stick - Available
Click 'view detail' for further deails and purchase
1/4 Overhead panel base - Available
for further detail and purchase, please visiti 'view detail' tab.
Special Mission/Equipment
1/4 EC 135 Underload Hook, in kit form - Available
Landing skid set is for illustration only and not included. For further details, options and purchase, please visit 'view details'
1/4 Radar Dome type 2 EC 135 - available
1/4 Radar Dome Type 3 EC 135 - available
Made from Resin and plastic material in Kit Form.
for the plastic material it is literaly ready to install.
for the plastic material it is literaly ready to install.
Pictures show part made from Resin after post casting
work.
1/4 EC 135 Cylinder Tank in Kit form - Available
Made from Plastic in kit form, It is very light. Picture shows in
finish product
finish product
1/4 O2 Tank Cover R/L - available
.Most of Emergency Helicopter has this part on both side to cover the oxygen tank.
Made from Resin material including the small latch. With the resin part you need to
cut and adjust these parts to match with surface contour. While with the plastic
material it is ready to install and much lower weight
Made from Resin material including the small latch. With the resin part you need to
cut and adjust these parts to match with surface contour. While with the plastic
material it is ready to install and much lower weight
1/4 EC 135 Air Filter in kit form - Please ask first
Made from ABS Plastic in kit form (picture shows in assembly form), fine mesh and latches are included. This air filter is for certain model of Air Ambulance. This air filter is installed on top of existing original fuselage part. it is very light weight and thin (0.77mm) and very tough
1/4 EC 135 Fix for winch/Winch Holder, x2 - Available
For further details, options and purchase, please go to 'view detail'
1/4 EC135 Fix for winch/Winch Holder, x2, Flat Base T1 - in Stock
Made from ABS Plastic Material. this is for cosmetic only
and not for use on scale Winch
1/4 Spectrolab Front holder Set - available
Made entirely from ABS Plastic. Spectrolab
is not included. For complete parts with
the Spectrolab made from ABS plastic see
the option
1/4 EC 135 Spectrolab X16, in RTF form - available
For further details, options and purchase, please visit 'view details'
1/4 Spectrolab spot light/Spectrolab X16 - Available
Spectrolab X16 with dual lens. Kit will also include Gold and clear lens, LED and fixing screws. For further details and purchase please click tab 'view detail'
1/4 Thermal Imaging Camera/FLIR Camera T1 - Available
for further detail and choice please click 'view detail' tab
1/4 Thermal Imaging/FLIR Star Safire, T2, - Available
For further details, options and purchase, please click 'view detail'
1/4 EC 135 Winch in kit form - available
For further details, options and purchase, please visit 'view details'
1/4 EC135 Winch, RTF - Available
Please add Winch holder for this order. The package include decals and down light LED
1/4 EC 135 NightSun XP, in kit form - available
For further details, options and purchase, please visit 'view details'
1/4 Spectrolab Nightsun SX16- Available
made from light weight plastic material
includes LED and len
includes LED and len
1/4 EC 135 Speaker systems, 1 set - Available
For further details, options and purchase, please visit 'view details'
1/4 Speaker - Available
please go to view details for choices
