This page is for Scale Parts EC 135 20% scale or 1/5. Unless stated in RTF/
Finish form, All parts are in kits and made from ABS Plastic and/or in
combination with UV Resin. Pictures shown are based on 3d Design drawings.
For details, please refer to 'how it's made' Section.
FOR SOME ITEMS WITHOUT PRICE (ZERO PRICE) - WE ARE WAITING FOR THE PRICE TO BE PUBLISHED
Finish form, All parts are in kits and made from ABS Plastic and/or in
combination with UV Resin. Pictures shown are based on 3d Design drawings.
For details, please refer to 'how it's made' Section.
FOR SOME ITEMS WITHOUT PRICE (ZERO PRICE) - WE ARE WAITING FOR THE PRICE TO BE PUBLISHED
Antenna
1/5 EC135 Antenna base centre top - available
without metal rod antenna. click view detail for further detail and purchase
1/5 EC135 Antenna tail boom left side - available
without metal rod antenna. click view detail for further detail and purchase
1/5 EC135 Antenna on stabilizers - available
For further details, options and purchase, please go to 'view detail'
1/5 EC135 Pitot tube x2 - available
For further details, options and purchase, please go to 'view detail'
1/5 EC135 Stabilizer antenna - available
For further details, options and purchase, please go to 'view detail'
1/5 EC135 Lateral tail antenna x2 - available
click view detail for further detail and purchase
1/5 EC135 Sensor antenna Fenestron - available
click view detail for further detail and purchase
1/5 EC135 Antenna in front of intake x2 - available
For further details, options and purchase, please go to 'view detail'
1/5 EC 135 GPS Tail Boom Box, in kit form - Available
For further details, options and purchase, please go to 'view detail'
1/5 Antenna Flat Type -1 set - available
This is for Eurocopter located under the belly. consist of 1 long and 2 short. click view detail for further detail and purchase
1/5 EC 135 Fenestron T1 Antenna 1 piece only - Available
For further details, options and purchase, please go to 'view detail'
1/5 EC135 Fenestron Antenna T2- 1 set - available
For further details, options and purchase, please go to 'view detail'
1/5 EC135 Rear antenna/Tail Antenna -x2 - available
click view detail for further detail and purchase
1/5 EC 135 Top Antenna/Top Side Antenna T1 , 1 set - Available
For further details, options and purchase, please go to 'view detail'
1/5 EC 135 Distress Beacon Antenna, 1 set - Available
For further details, options and purchase, please go to 'view detail'
1/5 EC135 Top Side radio Antenna T2 - available
For further details, options and purchase, please go to 'view detail'
1/5 EC 135 Type Antenna, 1 pcs - Available
Without metal rod. For further details, options and purchase, please go to 'view detail'
1/5 EC 135 Radio Antenna/Curved antenna, 1 pcs - Available
For further details, options and purchase, please go to 'view detail'
1/5 EC 135 Antenna under boom/Twin Bottom Tail GPS Antenna, 1 pair (2x) - Available
For further details, options and purchase, please go to 'view detail'
1/5 EC 135 Pitot Tube Under Cabin - Available
For further details, options and purchase, please go to 'view detail'
1/5 Pitot Tubes in Kit form Type 2 - pack of 2 (1R & 1L) - available
Click view detail for further detail and purchase
1/5 GPS Antena Cover - available
click view detail for further detail and purchase
1/5 EC135 Cover below Fenestron - available
Click view details for more options and choice
LIGHTING SCALE PARTS
1/5 EC135 Access lighting x2- available
Click view details for more options and choice
1/5 EC135 Spot light/Landing Skid Lamp T1 , 1 set R&L - Available
The kit includes LEWD, LED holder and Plastic clear Lens. For further details, options and purchase, please visit 'view details'
1/5 EC 135 Skid Lamp with double clamp, 1 pair - Available
Clear Lenses and LED lights are included. For further details, options and purchase, please visit 'view details'
1/5 EC 135 Folding Landing Light, in kit form - Available
Clear Lens and LED Light are included. For further details, options and purchase, please visit 'view details'
1/5 Folding landing Light, in kit form - Available
Made from Resin, ABS Plastic. Fasteners are included. See this video
for further details. https://www.youtube.com/watch?v=wmNVumdQTOE.
for further details. https://www.youtube.com/watch?v=wmNVumdQTOE.
You need to add your own servo
1/5 EC 135 Nose Landing Light Housing , in kit form - Available
Made from combination of UV Resin and ABS Plastic.
Clear lens and LED light are included
1/5 Scale Landing housing light EC 135 - 1 set - available
Made from ABS Plastic consists of 2 main parts, holder and the lamp housing.
This lamp house rotates up and down.
This lamp house rotates up and down.
1/5 EC 135 Navigation Light for Horizontal Stabilizer, 2 sets in kit form - available
Made from ABS Plastic and designed for 5mm diameter LED Lamp. LED not inluded. For further details, options and purchase, please visit 'view details'
1/5 Position Light T1 , R&L - Available
For further details, options and purchase, please visit 'view details'
1/5 EC 135 Position LIght T2, R&L - Available
For further details, options and purchase, please visit 'view details'
1/5 EC 135 Position Light, R&L - Available
For further details, options and purchase, please visit 'view details'
1/5 EC 135 Top Tail Front Nav Light, Available
LED light is not included. For further details, options and purchase, please visit 'view details'
1/5 EC 135 Top Tail Rear Nav Light, 1 set - Available
LED light is not included. For further details, options and purchase, please visit 'view details'
External Fittings
1/5 EC135 Working Door Hinges in kit form 4 sets - available
it is in RTF and ready to install. for further detail and purchase please visit 'view detail '
1/5 EC 135 Opening window/Working Front window opening slider, R&L - Available
For further details, options and purchase, please visit 'view details'
1/5 EC135 Rear Door Window Slider R/L (2 each) T1 (small) - available
made fromABS Plastic.This is a functional part that make you
able to slide part of the rear window to open partially. For further details, options and purchase, please visit 'view details'
able to slide part of the rear window to open partially. For further details, options and purchase, please visit 'view details'
1/5 EC135 Rear Window Slider T2 (R/L) - available
Made from ABS Plastic. This is a working accessories. Part of the window now can be slide open and close like the original.
For further details, options and purchase, please visit 'view details'
1/5 EC135 Exhaust Cover - 2ea - available
Please mention the inner diameter of the exhaust For further details, options and purchase, please visit 'view details'
1/5 EC135 Rear Exhaust Grill - 2ea - available
For further details, options and purchase, please visit 'view details'
1/5 EC 135 Side Gril set, pack of 6(2 x 3 parts) - Available
For further details, options and purchase, please visit 'View detail' tab
1/5 Air outlet Top rear side EC 135 - 2 ea - Available
1/5 EC 135 Top Rear Double grill Exhaust, 1 set 0f 2 pcs - Available
For further details, options and purchase, please visit 'view details'
1/5 EC 135 Scale Exhaust system - available & price to be published
Please go to view detail tab for more options and purchase
1/5 Engine exhaust T2 - 2 ea - available
Working Engine exhaust for airflow from inside Fuselage made from ABS Plastic in super light weight material and design. Please mention the inner diameter of the exhaust. For further details, options and purchase, please visit 'view details'
1/5 EC135 Door hardware/Cowling Latches 8 each - Available
For further details, options and purchase, please go to 'view detail'
1/5 Stabilizer center brackets in pair or R&L, available
For further details, options and purchase, please visit 'view details'
1/5 EC135 center stabilizer bracket in pair - available
please go to 'view detail' tab for options and purchase
1/5 stabilizer end/tip bracket in pair R&L, available
For further details, options and purchase, please visit 'view details'
1/5 EC 135 Superfine Scale Cowling latches, 16 pcs - available
900 EC 135 Superfine Scale Cowling latches consist of 16 pcs in 1 pack. This ultimate quality made from UV resin 3D Printer
1/5 EC135 Hinges/Latches with butterfly screw , 16 pcs - Available
For further details, options and purchase, please go to 'view detail'
1/5 EC 135 Rear Door Emergency Door guide Latch, R&L - Available
For further details, options and purchase, please go to 'view detail'
1/5 EC135 Scale Tail Latches - available
Tail latches in scale. 1 pack consist of 16 each of this item. It is ready to
install and no sanding required, Made from UV Resin for superfine
surface finish and detail.For further details, options and purchase, please go to 'view detail'
install and no sanding required, Made from UV Resin for superfine
surface finish and detail.For further details, options and purchase, please go to 'view detail'
1/5 EC135 Hinges - Non Working 4 ea - available
Dummy HInges for back side door of Eurocopter. For further details, options and purchase, please go to 'view detail'
1/5 EC135 Static Hinges - available
hinges for cowling in pair. For further details, options and purchase, please go to 'view detail'
1/5 EC 135 Engine Cowling Long Hinges, R&L - available
There are choice of material, made from ABS plastic and UV Resin. UV Resin
has superb detailed and superfine surface finish
1/5 EC135 Rear door hinges x4 - available
Click view details for more options and choice
1/5 EC135 Rear door lock - available
For further details, options and purchase, please go to 'view detail'
1/5 EC135 Trapdoor handle x6 - available
Click view details for more options and choice
1/5 EC135 ventilation window for sliding door Right - available
Click view details for more options and choice
1/5 EC135 ventilation window for sliding door Left - available
Click view details for more options and choice
1/5 EC 135 Static Door Handle Rear, R&L - Available Now
For further details, options and purchase, please go to 'view detail'
1/5 EC 135 Working Front Door Handle, R/L - 1 set - Available
For further details, options and purchase, please go to 'view detail'
1/5 Triangular foot step flat T1 in kit form, 1 set - in available
Triangular step bar including scale bracket made from plastic ABS for rear and front. Scale screws are not included. Step bar is in kit consist of 3 pcs.
1/5 Triangular foot step flat T1 in kit form, 2 sets (R&L) - available
Triangular step bar including scale bracket made from plastic ABS for rear and front. Scale screws are not included.Step bar is in kit consist of 3 pcs. For further details, options and purchase, please visit 'View detail' tab
1/5 Triangular foot step different level T2, in kit form, 1 set - available
Triangular step bar including scale bracket made from plastic for rear and front. Scale screws are not included. For further details, options and purchase, please visit 'View detail' tab
1/5 Triangular foot step different level T2, in kit form, 2 sets - R&L - available
Triangular step bars in 3 pcs including scale bracket made from plastic for rear and front. Scale screws are not included. For further details, options and purchase, please visit 'View detail' tab
1/5 scale - 900 Foot rest Tubular - 1 set in kit form - available
This tubular foot rest is also used as holder for FLIR or spectrolab lamp
1/5 scale - 900 Foot rest Tubular - 2 sets in kit form - available
This tubular foot rest is also used as holder for FLIR or spectrolab lamp
1/5 EC 135 Rounded Step Bar set for R or L only - Available
Made from ABS Plastic and Aluminium tubing with OD 15mm,
Other size of Tubing, please ask. For further details, options and purchase, please visit 'View detail' tab
Other size of Tubing, please ask. For further details, options and purchase, please visit 'View detail' tab
1/5 EC 135 Scale End Cap Tubular, 1 pcs - Available
Made from ABS Plastic., Please mention diameter of Inner Tube
(ID dia) you have. Tube in the picture is not included. For further details, options and purchase, please visit 'view details'
(ID dia) you have. Tube in the picture is not included. For further details, options and purchase, please visit 'view details'
1/5 Foot Rest Tubular Holder - 4 pair (L/R) - available
Now can be purchased The holder only. This is to save delivery costs for far/overseas customer without the aluminium tubes. For further details, options and purchase, please visit 'view details'. Please mention the OD of alumunium tube you want to use.
1/5 Scale Round Bar Holder Premium - 2 sets R/L - available
Scale fixing screws. This part is not only ready to install but also very tough. Picture shows only 1 set. For further details, options and purchase, please visit 'view details'
1/5 Scale Sliding door set left & right side - 1 Set EC 135 V2 with bearing - available
This scale part is for working rear sliding door working as the real one.
Starting from 20/09/2012, this part will include Sliding door kit below.
click this link for video http://www.youtube.com/watch?v=uG3dN98aB8w
Starting from 20/09/2012, this part will include Sliding door kit below.
click this link for video http://www.youtube.com/watch?v=uG3dN98aB8w
1/5 EC 135 Sliding Door Middle rail covers, 2 each - Available
For further details, options and purchase, please visit 'view details'
1/5 EC135 Wipers/Wind screen wiper set - 1 set (2 pieces)- available
Windscreen set for Eurocopter for EC 135
1/5 EC 135 Windshield Wiper, 1 set - Available Now
For further details, options and purchase, please visit 'view details'
1/5 EC135 Windscreen Cable deflector for - available
For further details, options and purchase, please visit 'view details'
1/5 Cable Cutter For Top Side - available
Consist of 7 parts in Kit forms. made from ABS plastic , resin and Metal hollow tube. For further details, options and purchase, please go to 'view detail'
1/5 Cable Cutter Bottom Side - available
Consist of 7 parts in Kit forms. made from ABS plastic,resin and Metal hollow tube
1/5 EC 135 Under Cabin Cable Cutter, in kit form - Available
For further details, options and purchase, please go to 'view detail'. content is as same as top cable cutter
1/5 Step Ladder in kit form- 6 ea - available
This is for Eurocopter EC 135, side body steps opening.
Made from ABS and UV Resin, consist of 6 sets, 2 large and
4 small opening and steps. For further details, options and purchase, please go to 'view detail'
1/5 EC135 Dummy Side body Steps - Available
consist of 6 pcs. click view detail for further detail and purchase
1/5 EC 135 Fenestron handle/holder T1, in pair - Available
For further details, options and purchase, please go to 'view detail'
1/5 Fenestron Holder T2 available
For further detail and purchase, please click tab 'view detail'
1/5 EC 135 Air inlet top Cab, 1 pcs - Available
For further details, options and purchase, please go to 'view detail'
1/5 EC 135 Air Intake/Air inlet Under Cab, 1 pcs - Available
For further details, options and purchase, please go to 'view detail'
1/5 EC 135 Air inlet 6 pcs - Available Now
For further details, options and purchase, please go to 'view detail'
1/5 Set of Air inlet in kit form - 5 ea - available
This is working air inlet for Eurocopter EC 135. Consist of 4 standard air inlet and 1 small one
1/5 EC135 standard NACA Air inlet - Available
2 pieces large and 1 pieces small. For further details, options and purchase, please go to 'view detail'
1/5 Skid Sink Protection T1 - Available
Simply known as bear paws. Made from plastic material in pair. For further details, options and purchase, please visit 'View detail' tab
1/5 Skid Sink Protection in Complete Part T1 - available
For further details, options and purchase, please visit 'View detail' tab
1/5 Skid Sink Protection in Complete Part T2- available
Made from ABS Plastic for R/L side. bolt and nut are included. click view detail for further detail and purchase. For further details, options and purchase, please visit 'View detail' tab
1/5 EC135 Skid Extension Plates in Kit Form in Pair R/L - available
Skid extension Plate for EC 135. For further details, options and purchase, please visit 'View detail' tab
1/5 Scale handles 3 pairs R/L EC 135 - available
click view detail for further detail and purchase
1/5 EC 135 Body handles, 6 each - Available
For further details, options and purchase, please visit 'view details'
1/5 EC135 Outlet x2 - available
For further details, options and purchase, please visit 'view details'
1/5 EC 135 long outlets 2X - Available
click view detail for further detail and purchase
1/5 EC135 Short outlet, 2x - available
click view detail for further detail and purchase
1/5 EC135 Pressure compensation pipe - available
Click view details for more options and choice
1/5 EC135 Front support for landing gear x2 - available
click view detail for further detail and purchase
1/5 EC135 Rear support for landing gear x2 - available
click view detail for further detail and purchase
1/5 EC135 Scale back Mirror in Kit form - Available
click view detail for further detail and purchase. Rear Mirror is included
1/5 EC135 Antenna under tail - available
For further details, options and purchase, please go to 'view detail'
1/5 EC135 VHF/UHF Antenna - Available
For further details, options and purchase, please go to 'view detail'
1/5 EC 135 Antenna round/ADF Antenna, 1 pcs - Available
For further details, options and purchase, please go to 'view detail'
1/5 EC 135 Rear Bottom Antenna, 1 set - Available
Made from UV Resin and metal rod
1/5 EC 135 Single DME Antenna, 1 pcs - Available
For further details, options and purchase, please go to 'view detail'
1/4 EC 135 Twin Transponder Antenna, 1 pcs - Available
For further details, options and purchase, please go to 'view detail'
1/5 EC 135 VHF Air 1 Antenna, 1 set of 2 pcs - Available
For further details, options and purchase, please go to 'view detail'
1/5 EC 135 VHF Air 2 Antenna, 1 set - Available
For further details, options and purchase, please go to 'view detail'
1/5 EC 135 VOR Antenna T1 Square Base, 1 pair - Available
For further details, options and purchase, please go to 'view detail'
1/5 EC 135 VOR Antenna T2 Round Base, 1 pair - Available
For further details, options and purchase, please go to 'view detail'
1/5 EC 135 Winch Electrical Connectors, 1 set - Available
Made from UV Resin
1/5 EC 135 Undercarriage brackets, 4 sets in kit form - Available
For further details, options and purchase, please go to 'view detail'
1/5 EC 135 Latches standard, 20 pcs - Available
For further details, options and purchase, please go to 'view detail'
1/5 EC 135 Winch connection/External body Electrical Connectors, 1 pair (2 pieces) - Available
consist of 2 pcs. For further details, options and purchase, please go to 'view detail'
1/5 EC 135 Winch connection/External body Electrical Connectors, 5 pair (10 pieces) - Available
consist of 10 pcs. For further details, options and purchase, please go to 'view detail'
1/5 EC 135 Accessories 1, 8 each - available
For further details, options and purchase, please visit 'view details'
Interior Fittings
1/5 EC135 Distress Beacon/Emergency Beacon 1 set -available
Made from Resin, ABS Plastic or UV Resin in 1 pcs.
This is for EC 135 and EC 145. Picture shows 2 sets
for clarity purpose. Sticker is not included.
1/5 EC135 Working seat belt Seat Belt 4 points R&L in kit form, 2 sets - available
supplied with the belt. see this video for detail https://www.youtube.com/watch?v=aPbFRVqjB9s
For further details, options and purchase, please visit 'view details'
For further details, options and purchase, please visit 'view details'
1/5 EC135 Static Seat Belt 4 points R&L in kit form, 2 sets - available
Same as above but the head is static. supplied with the belt.
For further details, options and purchase, please visit 'view details'
For further details, options and purchase, please visit 'view details'
1/5 EC135 Fire extinguisher - 1 set - available
Scale fire extinguisher, For further details, options and purchase, please visit 'view details'
1/5 EC 135 Telephone On Board, - Available
For further detail and purchase, please go to view detail
1/5 EC 135 Full Scale Seat in Kit form 1 set - 3 days production required
Made from ABS Plastic and designed to follow actual seat for EC 135/145. The angle of the seat can be set, while the headrest not only the angle but also the height. You can add your own fabric to cover the mechanic inside the for further scale. For further details, options and purchase, please visit 'view details'
1/5 Light weight Seat 1 set in kit form, T2 - available
Made from plastic material with the weight lightest
we ever made. For further details, options and purchase, please visit 'view details'
we ever made. For further details, options and purchase, please visit 'view details'
1/5 EC 135 Cyclic Stick, 1 set R or L - Available
For further details, options and purchase, please visit 'view details'
1/5 EC 135 Collective Stick, x2 - Available
For further details, options and purchase, please visit 'view details'
1/5 EC135 Pedals/ Cockpit Pedal in kit form - x2 - available
Control Pedal For Pilot. This is for EC 135 and EC 145
1/5 EC135 Pedals/ Cockpit Pedal in kit form - 1 Set - available
click 'view detail' for further detail and purchase
1/5 EC135 Door Stabilus R/L - in Kit Form - available
Some light works and assembly is required. Made from Carbon Fiber, Metal and resin material. Picture is in Ready to install form. For further details, options and purchase, please visit 'view details'
1/5 EC135 Door Stabilus R/L - in Assembly Form - available
Ready to Install door stabilus for EC 135. For further details, options and purchase, please visit 'view details'
1/5 EC135 Cockpit Panel T2 (half cockpit) cockpit half- Available
For further details, options and purchase, please visit 'view details'
1/5 EC 135 Cockpit Set T1 - Available
Made from UV Resin and ABS Plastic. Instrument decal and cockpit plastic glass panel are included. For RTF can be made with or without LEDs and backlit for glass cockpit panel.
1/5 EC 135 Overhead Cockpit Panel - Availabel
For further details, options and purchase, please visit 'view details'
1/5 EC135 Rotor Brake stick - Available
Click 'view detail' for further deails and purchase
1/5 EC135 Overhead panel base - Available
for further detail and purchase, please visiti 'view detail' tab.
Special Missions
1/5 EC 135 Underload Hook, in kit form - Available
Landing skid set is for illustration only and not included.
For further details, options and purchase, please visit 'view details'
1/5 EC135 Radar Dome type 2 - available
For further details, options and purchase, please visit 'view details'
1/5 EC135 Radar Dome Type 3 - available
For further details, options and purchase, please visit 'view details'
1/5 EC 135 Cylinder Tank in Kit form - Available
Made from Plastic in kit form, It is very light. Picture shows in
Assembled form
Assembled form
1/5 O2 Tank Cover R/L - available
.Most of Emergency Helicopter has this part on both side to cover the oxygen tank.
Made from Resin material including the small latch. With the resin part you need to
cut and adjust these parts to match with surface contour. While with the plastic
material it is ready to install and much lower weight
Made from Resin material including the small latch. With the resin part you need to
cut and adjust these parts to match with surface contour. While with the plastic
material it is ready to install and much lower weight
1/5 EC 135 Air Filter in kit form - Available
Made from ABS Plastic in kit form (picture shows in assembly form), fine mesh and latches are included. This air filter is for certain model of Air Ambulance. This air filter is installed on top of existing original fuselage part. it is very light weight and thin (0.77mm) and very tough
1/5 EC 135 Fix for winch/Winch Holder, x 2 - Available
please note this parts is for aesthetic only. For further details, options and purchase, please visit 'View detail' tab
1/5 EC135 Fix for winch/Winch Holder, x2, Flat Base T1 - available
Made from ABS Plastic Material. this is for cosmetic only
and not for use on scale Winch. For further details, options and purchase, please visit 'view details'
1/5 EC135 Spectrolab Front holder Set - available
Made entirely from ABS Plastic. Spectrolab is not included. For further details, options and purchase, please visit 'view details'
1/5 EC 135 Spectrolab X16, in form - available
Clear Lens, Screws and Hardware are included. For further details, options and purchase, please visit 'view details'
1/5 Spectrolab spot light/Spectrolab X16 - Available
Spectrolab X16 with dual lens. Kit will also include Gold and clear lens, LED and fixing screws. For further details and purchase please click tab 'view detail'
1/5 Thermal Imaging Camera/FLIR Camera T1 - Available
for further detail and choice please click 'view detail' tab
1/5 EC135 Thermal Imaging/FLIR Star Safire, T2, - AVailable
For further details, options and purchase, please click 'view detail'
1/5 EC135 Winch - Available
Please add Winch holder for this order. Winch holder EC135 are different with EC 145. Please advise us which Fuselage that you order .
1/5 EC 135 NightSun XP, in kit form - available
Made from ABS Plastic and UV Resin, Lens
is included
1/5 Spectrolab Nightsun SX16- Available
made from light weight plastic material
includes LED and len
includes LED and len
1/5 EC 135 Speaker systems, 1 set - Available
For further details, options and purchase, please visit 'view details'