Eurocopter EC 145 for 1:5,6 Scale - Exterior Parts
Accessories are available in kit, Assembled and Finish forms . If you can not find the scale parts in this section, please go the next section of EC 135, as those parts are interchangeable - See Gallery for more details of location and installation.
FOR SOME ITEMS WITHOUT PRICE (ZERO PRICE) - WE ARE WAITING FOR THE PRICE TO BE PUBLISHED
FOR SOME ITEMS WITHOUT PRICE (ZERO PRICE) - WE ARE WAITING FOR THE PRICE TO BE PUBLISHED
EXTERNAL SCALE PARTS
1/6 Antenna Transponder EC 145 1:6 scale - available
Made from Resin
1/6 EC 145 GPS in full kit - available
Picture is in assembly and painted form. this is for EC 145 and parts
made from Resin and plastic material
made from Resin and plastic material
1/6 EC135/145 VHF/UHF antenna - available
Made from 2 different materials
1/6 VOR Antenna EC 145 1:6 scale T1 - available
A Pair of scale VOR Antenna made from combination of ABS Plastic
and Resin
and Resin
1/6 VOR Antenna EC 135 1:6 scale T2 - available
A Pair of scale VOR Antenna made from ABS Plastic and Resin
1/6 EC135/145 Antenna, round/ ADF Antenna - available
Made from Resin
1/6 VHF Antenna 1 in pair EC 145 1:6 scale - available
Made from rsin and metal rod
1/6 Distress Beacon EC 145 1:6 scale - available
Made from Resin and metal rod. Picture is for reference only
1/6 Twin Transponder Antenna EC 145 1:6 scale - available
Made from Resin
1/6 Antenna UHF EC 145 1:6 scale - Coming Soon
Made from ABS Plastic. Picture is for reference only
1/6 Antenna VHF 2 Ec 145 1:6 scale - available
Made from resin and metal rod
1/6 Antenna VHF Air 2 EC 145 /EC135 1:6 scale - available
Made from ABS Plastic Material.
1/6 EC135/145 Headlight/Landing Skid lamp, x2 (2 pieces) - available
1/6 Folding lamp EC 145/EC135 with Lens & LED - available
Same as above but included with Lens (60 degree angle) and high intensity
LED light. Included is 3W led and lens. pre wired and with your own servo, this part is ready to install.
LED light. Included is 3W led and lens. pre wired and with your own servo, this part is ready to install.
1/6 Folding lamp Under belly EC145/EC135 1:6 scale - available
Made from ABS Plastic and Resin including hardware (servo, matched lens and LED are excluded and should be purchased separately.
1/6 EC145 Position Light T1 (standard) - x2 - available
Base attachment for light on the rear stabilizer both EC 135 . Please note that
this part is slightly bigger than EC 135.
this part is slightly bigger than EC 135.
1/6 Position Light T2 EC 145 - x2 - available
Base attachment for light on the rear stabilizer both EC 135 . Please note that
this part is slightly bigger than EC 135.
this part is slightly bigger than EC 135.
1/6 Position Light T3 EC 145 - 2 ea - available
Base attachment for light on the rear stabilizer both EC 135 . Please note that
this part is slightly bigger than EC 135. See here for application
this part is slightly bigger than EC 135. See here for application
1/6 EC 145 Back Tail Nav Light 1 pcs - available
Made from ABS Plastic and intended to be used with 5 mm LED.
see this link for more details
see this link for more details
1/6 Tail Lamp T1 EC 145 1:6 scale - Available
Made from ABS Plastic and Resin material. Lens only 1 for
the top part.Click thislink for more details
the top part.Click thislink for more details
1/6 Tail Lamp T2 EC 145 1:6 scale - Available
Made from combination of resin and consist of 5 parts including
3 clear lens LED cap.
3 clear lens LED cap.
1/6 EC 145 Sliding door lamp R/L in pair - available
Sliding door lamp in pair made from ABS Plastic
1/6 Pair of Side Grill EC145 1:6 scale - available
Made from ABS Plastic .
1/6 Side Engine Cowling Grill EC145 1:6 scale - available
Made from ABS Plastic with working air flow grill. Comes in pair R/L , Designed
to follow the actual Fuselage Contour.
to follow the actual Fuselage Contour.
1/6 Side Door Latch 1:6 - available
Made from Resin (2ea ) for left and right.
1/6 Rear Door Hinges EC145 1:6 scale - available
Made from resin, 2 each for left and right side
1/6 EC 145 Side Access opening - available
side opening for EC 145 in kit form. Made from Resin and ABS plastic for
the hinges. the price is for 1 set only (normally require for left and right
side). Ball link is not included.
the hinges. the price is for 1 set only (normally require for left and right
side). Ball link is not included.
1/6 EC 145 Sliding Door (Dummy and static) - Available
Based on Working Sliding Door but without internal parts and moving parts. For purchase and further detail and options please go to 'view detail' tab. Picture show in complete part.
1/6 EC 145 Scale Sliding door with Bearing V2 - available
These 6 long slider are now made from UV Resin for smoother operations and easy to paint/fiish. this scale rear sliding door is for left and right side of EC 15 and included with 6 pcs special micro bearings for smoother movement, see this video for details. http://www.youtube.com/watch?v=uG3dN98aB8w.
1/6 EC145 Landing Skid Wire deflector R&L - Available
For further detail, choice and purchase, please go to 'view detail' Screws are not included
1/6 Skid tail Strike EC 145 1:6 scale - available
Made from Metal tubing and metal rod. included is pair of ABS holder.
end tail skid made from ABS, for full metal please ask. see here for more
details.
end tail skid made from ABS, for full metal please ask. see here for more
details.
1/6 End Cap Landing Skid EC145 1:6 scale - available
Comes in pair for standard landing skid. consist total of 4 parts and can
be used for EC 135 as well.
be used for EC 135 as well.
1/6 Long landing skid for EC 135 and EC 145 - Please ask first before purchase
Some model have extra long skid. the front end are designed to match with
skid extension plate (skid cable/wire deflector). Just replace the exisiting
with this same diameter aluminium tube. Due to the length, delivery
will use courier instead of standard international Royal Mail. Therefore,
plesae ask first for delivery costs
skid extension plate (skid cable/wire deflector). Just replace the exisiting
with this same diameter aluminium tube. Due to the length, delivery
will use courier instead of standard international Royal Mail. Therefore,
plesae ask first for delivery costs
1/6 EC 145 Dummy Side panel - available
2 pcs
1/6 EC135/145 Air Intake/Air Inlet Top cabin - available
1/6 EC135/145 Air Intake/Air inlet Under Cabin - available
1/6 EC135/145 Air inlet 1 Set (pack of 6) - available
3 pairs for left and right side. Design to follow surface contour of the fuselage. 3 pcs for each cowling fuselage (right and left side). Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Belly Air inlet EC 145 1 : 6 - available
Made from ABS Plastic.
1/6 Bear Paw/Skid Sink Protection R/L EC 135/EC145- available
Consist of resin part only for left and right side
1/6 EC 145 Belly Access cover - available
Made from Tough plastic material with curve at the base to suit
the fuselage curvature. comes in kit form.
the fuselage curvature. comes in kit form.
1/6 Under CarriageBracket EC 145 1:6 scale - available
Comes in 4 sets and made from Resin . This can also be used for EC 135
screws are not included. Vario fuselage 1:6 scale.
screws are not included. Vario fuselage 1:6 scale.
1/6 EC 145 Tail Vertical end stabs brackets in sets R/L - available
Made from ABS plastic kit, consist of 2 sets. each seat is for top and bottom.
This scale parts are intended to strengthened join between vertical and
horizontal stabs. scale screws are not included. Picture is in finished form
This scale parts are intended to strengthened join between vertical and
horizontal stabs. scale screws are not included. Picture is in finished form
1/6 EC 145 Tail Vertical stabs center brackets in sets R/L - available
Made form ABS Plastic, consist of left and right set. this part is for connection
between horizontal tail stabs to the tail section. Rivet is not included.
between horizontal tail stabs to the tail section. Rivet is not included.
1/6 EC 145 boom to vertical tail connector - Available
view detail for further choice and description
1/6 EC 145 Tail Nav T3 - Available
view detail for further choice and descriptions
1/6 EC145 Vertical tail stab detailing plate R&L - Available
view detail for further choice and description
INTERIOR SCALE PARTS
1/6 Light Weight Seat V2 EC 145/EC135 1 - Available
A pair of cockpit seats made from plastic with super light weight. Seat Slider sold separately. please view detail for options
1/6 Seat Slider EC135/EC145 1 ea - available
Made from ABS Plastic. This part will make easy to install, adjust
(forward-backward) and dismantle the seat quickly and easily.
Therefore no more glue used to make the seat firmly sit on the cabin
floor.
(forward-backward) and dismantle the seat quickly and easily.
Therefore no more glue used to make the seat firmly sit on the cabin
floor.
SPECIAL MISSION
1/6 Radar Nose T2 EC 145 - Available
Made from ABS Plastic, consist of 2 parts
1/6 EC135/145 Fix for winch/ Winch Holder T1, x2 - available
Together with winch electrical connectors, this part is more for scale appearance and installed on the fuselage surface. consist of 1 set (2pcs).
1/6 EC 145 Winch Holder T2 - available
1/6 EC135/145 Winch connections/Electrical Connector - 1 set (2 pieces) - available
1/6 EC135/145 Winch connections/Electrical Connector - 5 sets (10 pieces) - available
1/6 Water raft EC 145 1:6 scale - Available
Made from various material
900 Raft base brackets for EC 135 and EC 145 - available
Made from ABS Plastic, consist of 12 pcs