Eurocopter EC135 for 1:6 Scale
Accessories are available in kit, Assembled and Finish forms . If you can not find the scale parts in this section, please go the next section of EC 145, as those parts are interchangeable - ABS plastic are made from 3d printer using Ivory colour - See Galleries and Product guidelines for more details
ANTENNA EC135/145
1/6 EC135/145 Antenna base centre top - available
without metal rod antenna. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 EC135 Antenna tail boom left side - available
without metal rod antenna.. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 EC135 Antenna on stabilizers - available
without metal rod. . Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 EC135 Pitot tube pipe model x2 - available
1/6 EC135 Stabilizer antenna - available
without metal rod. . Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 EC135 Lateral tail antenna x2 - available
1/6 EC135 Sensor antenna Fenestron - available
1/6 EC135 Antenna in front of intake x2 - available
900 GPS Antenna for EC 135- in Full Kit Form - available
1/6 Antenna Flat Type -1 set - available
This is for Eurocopter located under the belly. consist of 1 long and 2 short. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 EC135/145 Flat type antenna with cover, 1 set - available
1/6 Fenestron Antenna EC 135 T1 - 1 piece - available
This is for Eurocopter EC 135. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Fenestron Antenna EC 135 T1 (twin) - 2 pieces -available
This is for Eurocopter EC 135. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Fenestron Antenna EC 135 T2- 1 set - available
This is for Eurocopter EC 135. Made from Resin and metal rod. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 EC135/145 Rear antenna/Tail Antenna -x2 - available
1/6 EC135/145 Top antenna/Top side Radio Antenna T1 - available
This is for Eurocopter. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Top Side radio Antenna T2 - available
This is for EC 135 and EC 145, Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Type Antenna - 1 ea - available
1/6 EC135/145 Radio/Curve antenna - Available
1/6 Antenna under boom/ Twin bottom flat square tail boom antenna - available
Twin tail boom antenna located at the bottom of tail boom. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 EC 135/145 Pitot tube under cab, in Kit form 1 set - Available
1/6 Pitot Tubes Standard in Kit form Type 2 - pack of 2 (1R & 1L) - available
1/6 GPS Antena Cover - available
TAIL SCALE PARTS
1/6 EC135 Cover below Fenestron - available
1/6 EC135 Cover T1 for Vario Fenestron Rectifier - in kit
the kit will include screws and brackets to the fenestron holder Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 EC135 Cover T2 for Vario Fenestron Rectifier - in kit
the kit will include screws and brackets to the fenestron holder. Vario Fenestron rectifier and holder in the picture (below side) is not included. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Fin Rectifier Holder EC 135 - 10 each - available
made from plastic material. This part is for connection. between the end rectifier tip to fenestron duct wall. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Rectifier for Fenestron T2 -available
Made from High DensityABS Plastic for rigidity. it is basically
just plug in, set and fix. it has cover at arm side with screws for
easy maintenance. the other side cover is not supplied anymore.
Click this link for further detail, and/or go to tab 'view detail' for
options and purchase.
just plug in, set and fix. it has cover at arm side with screws for
easy maintenance. the other side cover is not supplied anymore.
Click this link for further detail, and/or go to tab 'view detail' for
options and purchase.
1/6 Scale Rectifier for Fenestron T3 - available
Same as above, however the fin made based on flat bottom airfoil and
angled, and the cover is close to scale version. Click this link for further
detail, and/or go to tab 'view detail' for options and purchase.
angled, and the cover is close to scale version. Click this link for further
detail, and/or go to tab 'view detail' for options and purchase.
1/6 Rectifier for Fenestron T4- available
Same as above, however the fin made based on flat bottom airfoil and
angled, and the cover is close to scale version. click here for detail.
Click this link for further detail, and/or go to tab 'view detail' for
options and purchase.
angled, and the cover is close to scale version. click here for detail.
Click this link for further detail, and/or go to tab 'view detail' for
options and purchase.
1/6 EC 135 Fenestron Rectifier T5 for After Market Servo Arm (Multinut) in kit form - Available
Made from ABS Plastic. This kit is intended for the use aftermarket Servo Arm made from metal (Multinut) which require slightly bigger room to cover different arm movement and dimensions. Please got o view detail for further options and choices. Note : one end will include fin holder to fan wall. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
LIGHTING SCALE PARTS
1/6 EC135 Access lighting x2- available
1/6 EC135/145 Landing Skid Lamp with double clamps, 2 sets (Left and Right) - Available
comes with lens, LED and LED holder. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Folding landing Light, in kit form - Available
Made from Resin, ABS Plastic. Fasteners are included. See this video
for further details. https://www.youtube.com/watch?v=wmNVumdQTOE.
You need to add your own servo. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
for further details. https://www.youtube.com/watch?v=wmNVumdQTOE.
You need to add your own servo. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Scale Landing housing light EC 135 - 1 set - available
Made from ABS Plastic consists of 2 main parts, holder and the lamp housing.
This lamp house rotates up and down. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
This lamp house rotates up and down. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 EC 135/145 Navigation Light for Horizontal Stabilizer, 2 sets in kit form - available
Made from ABS Plastic and designed for 5mm diameter LED Lamp. LED not included.
Other optio for the materia is UV Resin. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
Other optio for the materia is UV Resin. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Position Light T1 (standard) EC 135 - x2 - available
Base attachment for light on the rear stabiliser both EC 135 Please note that this part is smaller than EC 145. click view detail for further detail and purchase. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
900 Position Light T2 EC 135 - x2 - available
Base attachment for light on the rear stabilizer both EC 135. Please note that this part is smaller than EC 145 Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Position Light T3 EC 135 - x2 - available
Base attachment for light on the rear stabiliser both EC 135. Please note that this part is smaller than EC 145. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Tail Nav light for EC 135 - available
Made from ABS Plastic. The unique design will allow an operational LED mounted at the tip and hidden the wiring onto fuselage. LED is not included. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Top Tail scale Part for EC 135 - available
Made from Resin and ABS Plastic. LED can be mounted easily
using the ring provided. LED in the picture is not included.
Click this link for further detail, and/or go to tab 'view detail' for
options and purchase.
using the ring provided. LED in the picture is not included.
Click this link for further detail, and/or go to tab 'view detail' for
options and purchase.
1/6 Working Door Hinges in kit form 4 sets from ABS material - available
1/6 EC135/145 Openning window/Slide Window for front door, x2 (1R & 1L) - available
This pair front window slider is made from ABS material. Using this part, you
open and close part of the front door window by sliding it partially or in full.
Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
open and close part of the front door window by sliding it partially or in full.
Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Rear Door Window Slider R/L (2 each) T1 (small) - available
made fromABS Plastic.This is a functional part that make you
able to slide part of the rear window to open partially. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
able to slide part of the rear window to open partially. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Rear Window Slider T2 (R/L) - available
Made from ABS Plastic. This is a working accessories. Part of the window
now can be slide open and close like the original. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
now can be slide open and close like the original. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
GRILLS SCALE PARTS
1/6 Exhaust Cover EC 135- 2ea - available
Made from ABS Plastic in light weight design. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 EC 135 Scale Exhaust system (Right and Left)- available
Using the existing original exhaust tube part (grey plastic) plus some
more part we make (outer holder and inner parts including turbine
part) in kit form. The holder is made smaller in size. Picture is for reference only.
Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
more part we make (outer holder and inner parts including turbine
part) in kit form. The holder is made smaller in size. Picture is for reference only.
Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Rear Exhaust Grill EC 135 - 2ea - available
1/6 EC 135 Side Grills T2, R&L 6x - Available
1/6 Air outlet Top rear side EC 135 - 2 ea - available
1/6 Engine exhaust T2 - 2 ea - available
Working Engine exhaust for airflow from inside Fuselage made from
ABS Plastic in super light weight material and design. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
ABS Plastic in super light weight material and design. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 EC135/145 Door hardware/Set of Latches, x8 - available
This is a set of latches for Eurocopter EC 135, EC 145. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Stabilizer center brackets in pair or R&L, available
made from plastic material. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 EC135 center stabilizer bracket in pair - availabel
please go to 'view detail' tab for options and purchase. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 stabilizer end/tip bracket in pair R&L, available
made from plastic material. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 EC 135/145 Superfine Scale Cowling latches, 16 pcs - available
900 EC 135/145 Superfine Scale Cowling latches consist of 16 pcs in 1 pack. This ultimate quality made from UV resin 3D Printer. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 EC135/145 Hinges/Scale Cowling hinges butterfly screw- - available
in kit form and can be made only from UV resin, each pack consist of 16 pcs. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 EC135/145 Door hardware/Rear Door Emergency Door guide Latch, x2 (1R & 1L - Available
1/6 EC135/145 Undercarriage brackets, 4 sets in kit form - Available
1/6 EC135 Scale Tail Latches - available
Tail latches in scale. 1 pack consist of 16 each of this item. It is ready to
install and no sanding required, Made from UV Resin for superfine
surface finish and detail. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
install and no sanding required, Made from UV Resin for superfine
surface finish and detail. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Hinges - Non Working 4 ea - available
Dummy HInges for back side door of Eurocopter. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Static Hinges - available
hinges for cowling in pair made from UV Resin. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 EC 135 Engine Cowling Long Hinges, R&L - available
.There are choice of material, made from ABS plastic and UV Resin. UV Resin
has superb detailed and superfine surface finish. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
has superb detailed and superfine surface finish. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 EC135 Rear door hinges Static x4 - available
1/6 EC 135 Rear Door HInges Working X4 from ABS material - Available
Please go to view detail for purchase and further options. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 EC135/145 Rear door lock - available
1/6 EC135 Trapdoor handle x6 - available
1/6 EC135 Ventilation window for sliding door Left - available
1/6 Static door Handle R/L EC 135 and EC 145 - available
Scale door handle for rear sliding door R/L made from ABS Plastic
for extra strength. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
for extra strength. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Working door handle R/L - 1 set - available
Scale door handle for front R/L door and rear R/L door for EC 135
and EC 145. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
and EC 145. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Triangular foot step flat T1 in kit form, 1 set - available
Triangular step bar including basic / standard bracket made from plastic ABS. It consist of 3 main sections plus end front and rear tip. Picture shows only for reference and it is in RTF / finish form. Scale screws are not included. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Triangular foot step flat T1 in kit form, 2 sets - R&L - available
Triangular step bar including basic / standard bracket made from plastic ABS. It consist of 3 main sections plus end front and rear tip. Picture shows only for reference and it is in RTF / finish form. Scale screws are not included. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Triangular foot step different level T2, in kit form, 1 set - available
Triangular step bar including scale bracket made from plastic for rear and front. Scale screws are not included. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Triangular foot step different level T2, in kit form, 2 sets - R&L - available
Triangular step bars in pcs including scale bracket made from plastic for rear and front. Scale screws are not included. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
900 Foot rest Tubular - 1 set in kit form - available
This tubular foot rest is also used as holder for FLIR or spectrolab lamp.
Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
900 Foot rest Tubular - 2 sets in kit form - available
This tubular foot rest is also used as holder for FLIR or spectrolab lamp.
Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 EC135 Main Landing Skid Bracket (1 set) in kit form - Available
for further detail and purchase, please go to 'View Detail' tab. You will require 4 sets for landing skid
Free delivery world wide*) for a total purchase over £100.00. For Domestic UK Mainland Minimum delivery of is £35.00. Less than the above, we will send you an invoice for delivery costs of £8.90 (overseas) and £2.80 (UK mainland). *) wherever covered by United Kingdom Royal Mail Tracked and Signed for Services
1/6 EC135 Tail Collar in kit form - Available - copy
for further detail and purchase, please go to 'View Detail' tab. This is a full kit parts, you require
to cut and tall part to get the require angle.
Free delivery world wide*) for a total purchase over £100.00. For Domestic UK Mainland Minimum delivery of is £35.00. Less than the above, we will send you an invoice for delivery costs of £8.90 (overseas) and £2.80 (UK mainland). *) wherever covered by United Kingdom Royal Mail Tracked and Signed for Services
1/6 Scale End cap for Tubular step - 1 each -available
Scale end cap for tubular foot step, can be used for scale connector to
Spectrolab of FLIR. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
Spectrolab of FLIR. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 EC135/EC145 Round step bar bent inward/outward in pair, in kit form - available
. This rounded step bar made from ABS, left and right including brackets as in the picture. The pipe and be bent inward (2nd picture) or downward (first picture). For purchase and further detail please go to 'view detail' tab. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 EC135/145 Triangluar foot step bent inward, in pair, in kit form - available
The part will include brackets to attache the bar to the u shape landing skid. Please got to 'view detail' tab for purchase and further detail. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Foot Rest Tubular Holder - 4 pair (L/R) - available
.Now can be purchased The holder only. This is to save delivery costs
for far/overseas customer without the aluminium tubes. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
for far/overseas customer without the aluminium tubes. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Scale Round Bar Holder Premium - 2 sets R&L - available
Same as above but made form Solid ABS Plastic, no work required, just install.
The part include Scale fixing screws. This part is not only ready to install but also
very tough. Picture shows only 1 set. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
The part include Scale fixing screws. This part is not only ready to install but also
very tough. Picture shows only 1 set. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Sliding Door rail cover (static) - available
Made from ABS Plastic . For Eurocopter EC 135, 145, This part is for Static Sliding door, Therefore The kit contains only 2 rail cover parts and screws. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 EC135/145 Wipers/Wind screen wiper set - 1 set (2 pieces)- available
Windscreen set for Eurocopter for EC 135 and EC 145. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Windscreen Cable deflector for EC 135 & EC 145 - available
1/6 Cable Cutter For Top Side - available
Consist of 7 parts in Kit forms. made from ABS plastic. Picture is for reference only.
Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Cable Cutter Bottom Side - available
Consist of 7 parts in Kit forms. made from ABS plastic. Picture is for reference only.
Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 EC135 Landing Skid Wire deflector R&L - Available
Screws are not included. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Step Ladder in kit form- 6 ea - available
This is for Eurocopter EC 135, side body steps opening.
Made from ABS and UV Resin, consist of 6 sets, 2 large and
4 small opening and steps
1/6 EC135/EC145 Dummy Side body Steps - Available
consist of 6 pcs. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 EC135/145 Dummy Side body opening 4 pcs - Available
1/6 Fenestron Holder T1, 2 ea - available
1/6 Fenestron Holder T2 available
1/6 EC 135 Sliding Door (Dummy and static) - Available
Based on Actual Sliding door but without internal rail and movement part. Fo purchase and further detail and options please go to 'view detail' tab. picture shows a complete kit parts
1/6 EC 135 Sliding door in kit form - Available
The 6 pcs slider is now made fro UV Resin. For further detail and purchase, please go to 'view detail tab' see video in this link http://www.youtube.com/watch?v=uG3dN98aB8w
1/6 EC135/145 Air Intake/Air Inlet Top cabin - available
1/6 EC135/145 Air Intake/Air inlet Under Cabin - available
1/6 EC135/145 Air inlet 1 Set (pack of 6) - available
3 pairs for left and right side. Design to follow surface contour of the fuselage. 3 pcs for each cowling fuselage (right and left side). Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Set of Air inlet in kit form - 5 ea - available
This is working air inlet for Eurocopter EC 135. Consist of 4 standard air inlet and 1 small one. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 EC135/EC145 Naca air inlet - Available
Consist of 2 large and 1 small. Click 'view detail' for further details and purchase.
Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Skid Sink Protection T1 - available
Simply known as bear paws. Made from plastic material in pair. This is the same
part used for EC 145. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
part used for EC 145. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Skid Sink Protection in Complete Part T1 - available
This package contain skid boom extension, boom end cover, skid boom extension
connector, skid protection made from resin and micro screws. Picture is in finish
product and only for reference.
connector, skid protection made from resin and micro screws. Picture is in finish
product and only for reference.
1/6 Skid Sink Protection in Complete Part T2- available
Made from ABS Plastic for R/L side. bolt and nut are included. click view detail for further detail and purchase. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Scale handles 3 pairs R/L EC 135 - available
1/6 EC135 Outlet x2 - available
1/6 EC135/145 long outlets, x2 - Available
1/6 EC135/EC145 short outlet, 2x - available
1/6 EC135 Pressure compensation pipe - available
1/6 EC135 Front support for landing gear x2 - available
1/6 EC135 Rear support for landing gear x2 - available
1/6 Scale back Mirror in Kit form EC 135 - Available
Real mirror is included. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
INTERIOR PARTS
1/6 EC135/145 Distress Beacon/Emergency Beacon 1 set - available
Made from Resin, ABS Plastic or UV Resin in 1 pcs.
This is for EC 135 and EC 145. Picture shows 2 sets
for clarity purpose. Sticker is not included. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
This is for EC 135 and EC 145. Picture shows 2 sets
for clarity purpose. Sticker is not included. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Working Seat Belt 4 points R&L in kit form, 2 sets - available
Supplied with belt,. The Buckle is not static, can be open and lock by turning the center key. 'view detail' for further choice and detail. see this clips to see how it works.
https://www.youtube.com/watch?v=aPbFRVqjB9s. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
https://www.youtube.com/watch?v=aPbFRVqjB9s. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Static Seat Belt 4 points R&L in kit form, 2 sets - available
Kit include belts. for options and purchase, Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Fire extinguisher - 1 set - available
Scale fire extinguisher, Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 EC 135/145 Telephone On Board, - Available
1/6 EC 135/145 Full Scale Seat in Kit form 1 set - 3 days production required
Made from ABS Plastic and designed to follow actual seat for EC 135/145.
The angle of the seat can be set, while the headrest not only the angle but
also the height. You can add your own fabric to cover the mechanic inside the
for further scale. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
The angle of the seat can be set, while the headrest not only the angle but
also the height. You can add your own fabric to cover the mechanic inside the
for further scale. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Light weight Seat 1 set in kit form, T2 - available
Made from plastic material with the weight lightest ever
we ever made Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
we ever made Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 EC135/145 Cyclic Control - available
1/6 EC135/145 Collective Pitch lever in Assy Form EC135/EC145 - available
1/6 EC135/145 Pedals/ Cockpit Pedal in kit form - x2 - available
1/6 EC135/145 Pedals/ Cockpit Pedal in kit form - 1 Set - available
1/6 Door Stabilus R/L - in Kit Form - available
Some light works and assembly is required. Made from Carbon Fiber,
Metal and resin material. Picture is in Ready to install form. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
Metal and resin material. Picture is in Ready to install form. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Door Stabilus R/L - in Assembly Form - available
Ready to Install door stabilus for EC 135 and EC 145. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 EC 135/145 Cockpit Panel T1 - Available
Ready to install cockpit for EC 135 and EC 145. Pictures
show RTF in full details kit. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
show RTF in full details kit. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Cockpit Panel T2 (half cockpit) cockpit half- Available
You can choose option between Kit form and RTF.
in drop down menu list in view detail. There are 2 model of
main panel instrument. the first model (type A) and (Type B).
Please mention the model when purchase. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
in drop down menu list in view detail. There are 2 model of
main panel instrument. the first model (type A) and (Type B).
Please mention the model when purchase. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Overhead Cockpit Panel - Available
Overhead Panel set for Eurocopter EC 135 & EC 145 this will include rotor brake set. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Rotor Brake stick - Available
1/6 Overhead panel base - Available
SPECIAL MISSION
1/6 Under Belly Hook - Available
Made from Combination of ABS and plastic sheet in kit form. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Radar Dome type 2 EC 135 - available
Made From ABS Plastic Material. Consist of 2 parts and can be easily modified
using the right hinges for functional cover. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
using the right hinges for functional cover. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 EC 135/145 Cylinder Tank in Kit form - Available
Made from Plastic in kit form, It is very light. Picture shows in
finish product. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
finish product. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 EC 135 Air Filter in kit form - Available
Made from ABS Plastic in kit form (picture shows in assembly form), fine mesh and latches are included. This air filter is for certain model of Air Ambulance. This air filter is installed on top of existing original fuselage part. it is very light weight and thin (0.77mm) and very tough. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 EC135/145 Fix for winch/Winch Holder, x2, Flat Base T1 - available
Made from ABS Plastic Material. this is for cosmetic only
and not for use on scale Winch. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
and not for use on scale Winch. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
900 Winch Holder EC 135 T2 - available
If you want to fly with the winch installed or using the working winch ,
then this part is the right choice as this part installed from the
inside fuselage for extra strength. with this part installing and detaching the winch become simple and straight forward. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
then this part is the right choice as this part installed from the
inside fuselage for extra strength. with this part installing and detaching the winch become simple and straight forward. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Spectrolab Front holder Set - available
Made entirely from ABS Plastic. Spectrolab
is not included. For complete parts with
the Spectrolab made from ABS plastic see
the option. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
is not included. For complete parts with
the Spectrolab made from ABS plastic see
the option. Click this link for further detail, and/or go to tab 'view detail' for options and purchase.
1/6 Spectrolab spot light/Spectrolab X16 - Available
Spectrolab X16 with dual lens. Kit will also include Gold and clear lens, LED and fixing screws. For further details and purchase please click tab 'view detail'
1/6 Thermal Imaging Camera/FLIR Camera T1 - Available
for further detail and choice please click 'view detail' tab
1/6 Thermal Imaging/FLIR Star Safire, T2, - Available
For further details, options and purchase, please click 'view detail'
1/6 EC135/EC145 Winch - Available
Please add Winch holder for this order. Winch holder EC135 are different with EC 145. Please advise us which Fuselage that you order .
1/6 Spectrolab Nightsun SX16- Available
made from light weight plastic material
includes LED and len
includes LED and len
